Date:

Category:

DevOps Strategy

Cloud Observability: What It Is and How to Set It Up on AWS

Written by

Dino Starcic

·

CEO

Cloud observability is the ability to understand what is happening inside your cloud systems by reading the data they emit: metrics, logs and traces. Monitoring tells you that something broke. Observability lets you work out why, even when the failure is one nobody anticipated. For a team running production on AWS, the practical question is not which tool to buy first but what to collect, where to send it and who acts on it. Most teams get further by treating that as an ongoing operations job than as a one-time project, and that is the work our AWS monitoring and observability service takes on for you through a shared backlog, with a typical 24-48 hour response time.

Cloudwisecloudwise.orgMake AWS Observability OngoingCloudwise handles AWS monitoring and observability through a shared backlog, with a typical 24, 48 hour response time.Visit

TL;DR

  • Observability means inferring a system’s internal state from its outputs. Monitoring watches known failure modes; observability helps you investigate unknown ones.

  • The three core signals are metrics (fast detection), logs (detail and root cause) and traces (the path of one request across services).

  • On AWS, the foundation is CloudWatch, CloudTrail, EventBridge and SNS, wired together so that every account’s data lands somewhere central and alerts reach a person.

  • The hard part is not collection. It is controlling telemetry cost and alert noise as your system grows.

  • Cloudwise handles this as part of a subscription ($7,499 per month, no hourly billing, no long-term contract), so your engineers stay on product work.

Table of Contents

  • What cloud observability actually means

  • Observability vs. monitoring

  • The three types of observability data

  • Observability in AWS: the building blocks

  • What to set up first

  • Planning for cost and noise

  • Doing this without a dedicated platform team

  • Our offer for AWS teams

  • Where observability is heading

  • FAQ

  • Sources

What cloud observability actually means

IBM describes observability as the ability to understand the internal state of a complex system from its external outputs. In the cloud, those outputs are telemetry: the data your servers, containers, functions and managed services produce while they run.

Why does this matter more in the cloud than on a single server? Snowflake’s overview points out that ephemeral containers, auto-scaling groups, serverless functions and multi-cloud deployments can create infrastructure that lasts as little as 30 seconds. By the time you log in to look, the thing that failed may be gone. If the data was not captured while it ran, there is nothing to investigate.

That is the core idea: you decide in advance what evidence your systems will leave behind, so that when something odd happens at 2 a.m., the answer is already stored.

What cloud observability actually means

Observability vs. monitoring

The two are related, and you need both. AWS’s own comparison sums it up this way: monitoring is the when and what of a system error, and observability is the why and how.

In practice:

Monitoring

Observability

Question it answers

Is the system healthy right now?

Why is it behaving this way?

Based on

Predefined metrics and thresholds

Broad telemetry you can query in new ways

Best for

Known failure modes, alerting

Unfamiliar failures, root-cause analysis

Typical output

An alarm

An explanation

Cloudflare’s learning guide treats monitoring as a subset of observability, and SUSE notes the two work best together: monitoring flags the symptom, observability connects the signals to find the cause.

A simple example: a CPU alarm fires on one of your API servers. Monitoring told you it happened. Observability lets you see that the spike began right after a deployment, that one downstream service started returning slow responses, and that a single customer’s request pattern triggered it.

The three types of observability data

Microsoft’s Azure Monitor documentation names metrics, logs and distributed traces as the three pillars. The concept is vendor-neutral and applies on AWS in the same way.

Metrics

Metrics are numerical values sampled at regular intervals: request rate, error rate, latency, CPU, memory. The OpenTelemetry primer describes them as aggregations of numeric data over time. Because they are small and cheap to collect at scale, they are the natural basis for alerts, as Microsoft’s engineering playbook explains.

Google’s reliability guidance adds a useful point: include business metrics, such as orders placed, alongside technical ones. A healthy server with zero orders is still an outage from your customer’s point of view.

Logs

Logs are timestamped records of discrete events. They are larger and more verbose than metrics, so you use them to understand what happened once a metric points at the problem area. Structured logs (consistent fields rather than free text) are far easier to search across many services. For a deeper look at what to collect and how long to keep it, see our guide to cloud log management on AWS.

Traces

A trace follows a single request through every service it touches. The OpenTelemetry primer explains that a trace is built from spans, with a root span covering the request from start to finish. Traces are how you find the slow hop in a chain of ten microservices, and the signal teams most often skip until they need it.

The signals reinforce one another. IBM’s summary is that metrics alert you to the problem, traces show the execution path, and logs provide the context to resolve it. Logs become much more useful when they carry the trace identifier of the request they belong to.

Observability in AWS: the building blocks

AWS’s Guidance for Observability defines observability as the capability to gather and analyze operational data about activity in your systems, including anomalies, indicators of compromise, performance and configuration changes. It outlines an eight-step pattern that is a good map of what a mature AWS setup looks like:

  1. Deploy log analysis from CloudTrail organization trails and EventBridge.

  2. Centralize log visibility with CloudWatch cross-account observability.

  3. Build CloudWatch KPI metrics and alarms.

  4. Share dashboards with the people who need them.

  5. Centralize long-term log storage for CloudWatch, CloudTrail and AWS Config logs.

  6. Automate log archival to Amazon S3.

  7. Centralize events through EventBridge rules.

  8. Route notifications to the right teams through Amazon SNS.

What each service does, in plain terms:

  • CloudWatch collects metrics and logs and runs alarms and dashboards.

  • CloudTrail records who did what in your AWS accounts, which matters for both debugging and security.

  • EventBridge routes events from your accounts to the places that act on them.

  • SNS delivers notifications to people or systems.

  • S3 holds long-term log archives cheaply.

AWS says observability across the cloud foundation gives real-time insight into resource use, network traffic, application performance and security events, which lets teams spot issues early and optimize ahead of problems.

The cross-account step deserves attention. Once a company has separate accounts for production, staging and security, a problem rarely stays in one of them. Centralizing visibility means one place to look rather than five consoles.

What to set up first

You do not need all eight steps and a full tracing rollout on day one. A sensible order for a growing AWS team:

  1. Define what “healthy” means. Pick a handful of service-level indicators for each customer-facing service: error rate, latency and availability. Add one or two business metrics.

  2. Turn on the audit and platform logs. CloudTrail across the organization and logs from your load balancers, containers and functions. Our AWS monitoring best practices guide lists what every team should track.

  3. Alert on symptoms, not causes. Page a human when customers are affected (errors up, latency up), and send everything else to a lower-priority channel.

  4. Add dashboards per service, not one giant wall of graphs. Each should answer: is this service healthy, and if not, where do I look next?

  5. Introduce tracing on the request paths that matter most, such as checkout, login or your main API.

  6. Archive and expire. Decide how long each log type is kept and automate the move to cheaper storage.

  7. Review quarterly. Remove alarms nobody acted on, add ones for incidents that surprised you.

This is also where AWS security and observability meet: the same CloudTrail and configuration data feeds your AWS security checklist work.

Planning for cost and noise

Collecting telemetry is easy. Living with it is harder. Two problems show up in almost every growing system.

Data volume and cost

Every log line, metric and trace has a price to ingest, store and query. Google’s reliability guidance advises configuring exclusion filters on log sinks so that low-value entries are never stored, which is a direct way to control logging cost. The same thinking applies on AWS: decide what is worth keeping before it is ingested, not after the bill arrives.

Practical habits that keep volume in check:

  • Sample or drop routine health-check traffic.

  • Collect metrics at the resolution you will actually use.

  • Use shorter retention in the expensive tier and archive the rest to S3.

  • Watch for metrics with many unique label combinations, which multiply quickly.

Observability spend is part of your overall AWS bill, so it belongs in the same conversation as cost optimization and FinOps.

Alert noise

Too many alerts train people to ignore them. Google’s guidance recommends setting alert thresholds so as to minimize alert fatigue. A useful rule: if an alert does not require a human to do something within a defined time, it should not page anyone. Each alert should link to a dashboard or runbook so the person woken at night knows the first three things to check.

Doing this without a dedicated platform team

The list above is a lot of ongoing work: instrumenting services, tuning alarms, managing retention, keeping dashboards current as the architecture changes. A startup or a lean product team often has strong application engineers but nobody whose full-time job is operations.

Hiring a senior DevOps engineer for this is a significant commitment. The alternative is to put the work in the hands of senior AWS and DevOps engineers on a subscription. That is how Cloudwise works: you submit tasks to a shared backlog, prioritize them, and get a typical turnaround of 24-48 hours. There is no hourly billing, no long-term contract and no hidden costs, and you can cancel anytime.

For observability, a backlog might look like this:

  • Set up CloudWatch cross-account observability across production and staging.

  • Build a latency and error-rate dashboard for the checkout service.

  • Tune the alarms that paged the team eleven times last week.

  • Define log retention and archive rules.

  • Add tracing to the API gateway path.

Observability also connects to the rest of your operations. Alerts need Kubernetes and container expertise when workloads run on EKS, and good telemetry makes AWS infrastructure management and incident response faster, since engineers start from evidence instead of guesses.

Our offer for AWS teams

Cloudwise offers monitoring and observability for AWS, covering CloudWatch and Grafana, as one part of a single subscription alongside infrastructure management, cost optimization, security and DevOps automation. The Simplest Subscription is $7,499 per month, and every task goes through the same backlog, so you can put observability work first this month and cost work first the next.

Cloudwise

If you want to see how the pieces fit before deciding, the subscription page lays out the plan, and our AWS optimization score gives you a view of where your environment stands.

Where observability is heading

The three-pillar model is still the foundation, but the field keeps widening. The Elastic team has argued for profiling as a fourth signal, showing which code consumes resources. Multi-account and multi-cloud estates are pushing teams toward centralized, shared monitoring: Microsoft’s Cloud Adoption Framework advises inventorying every environment, defining collection, retention and alert requirements, then testing and refining. That cycle of define, collect, test and refine is the same on AWS, and it is a routine rather than a project with an end date.

Sources

Recommended

Questions Answered

Frequently asked questions

Clear answers to common questions about our AWS & DevOps subscription and how it works.

What is observability in the cloud?

Add Icon

What is observability in AWS?

Add Icon

What is observability in the cloud?

Add Icon

What is observability in AWS?

Add Icon

What is the difference between observability and monitoring?

Add Icon

What are the three types of observability?

Add Icon

What is the difference between observability and monitoring?

Add Icon

What are the three types of observability?

Add Icon

What is the difference between observability and monitoring?

Add Icon

What are the three types of observability?

Add Icon

Read More Articles